What it looks like
Off-track doors rarely fail quietly.
One side is higher
A cable may have slipped, a roller may have jumped, or the door may be lifting unevenly from a spring or drum issue.
The lower track is bent
Vehicle bumps, stored items, loose brackets, and forced opener cycles can bend the lower section of track.
The panel is twisted
Once a panel folds or bows, the roller path changes. Putting the roller back without checking the panel can leave the same problem waiting to happen again.

Do not pry it back
The door has to be secured before it is moved.
An off-track door can have spring tension, loose cables, and uneven weight all at once. Prying a roller back into place without controlling the door can make it drop, twist, or pull another part loose.
Dust and dry rollers around Yuma can add friction, but off-track damage usually has a direct trigger: impact, a cable problem, a bad roller, loose hinge, bent track, or forcing the opener after the door was already stuck.
Repair path
Realignment is only half the repair.
The door needs to be secured, the cables and rollers checked, the track straightened or replaced where needed, and the reason it came out of alignment corrected. If the panel is bent badly, panel replacement may be part of the conversation.
Related repairs
What usually caused it
Related repair guides
More off-track and crooked-door guides
These guides explain why doors come off track, why rollers pop out, how cables go loose, and why forcing a stuck door can bend tracks or panels.
Questions
Off-track door questions
Can I push the roller back into the track?
Do not force it. If the cable or spring is involved, the door can move suddenly.
Why did my garage door come off track?
Common causes include a snapped cable, impact damage, worn rollers, bent track, or a door that was forced while stuck.
What should I do before calling?
Stop using the opener if the door is stuck, crooked, heavy, dragging, or making a new sound. Call with what happened first and whether the door is open or closed.
Can Yuma heat and dust make this worse?
Yes. Heat, dust, sun exposure, dry seals, worn rollers, weak springs, and sensor glare can all make garage door problems show up faster.